Top 10 Best L298 Motor Controllers (2020 reviews)

Home » Motor Speed Controllers » Top 10 Best L298 Motor Controllers (2020 reviews)
.

There are plenty of options available while buying regular usage motor controller in the market right now, and if you’re confused regarding which one to go for, you have come to the right page.

After carefully exploring almost 100’s of motor controllers, we have arrived at these products. Our final set has the best products and we also managed to maintain variety within our selection for personal choice.

Note: Just because we dismiss a motor controller in the competition section doesn’t mean it’s not good. The following are simply our picks for the best motor controllers for most people – you may have your own specifications , that make a different motor controller better for you.

The look and feel of this motor controllers are consistent with the high quality we’re used to from the rest of Tecnoiot’s lineup. The Tecnoiot L298 Motor Controller is normally used for driving stepping motor on smart cars or robots. 2Pcs l298n driver board l298 stepper motor drive controller module dual h bridge. The input signal is valid and power supply of motor drive module is normal, motor driver module outputs current. Finally, the tecnoiot l298 motor controller is a fast and high quality delivery of spain buying in tecnoiot.


In This Article:


Top 5 Best L298 Motor Controllers

#BrandRating
1Tecnoiot L298 Motor Controller – Best Overall 5.0
2Diymore L298 Motor Controller – Best Runner Up 4.5
3Hong-Yang L298 Motor Controller – Best Premium 4.1
4Sqinaa L298 Motor Controller4.1
5Generic S L298 Motor Controller4.1


1. Tecnoiot L298 Motor Controller – Best Pick

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a motor controller. The Tecnoiot L298 Motor Controller is exactly that – it’s a simple motor controller that hits all the right notes. The tecnoiot l298 motor controller is designed with screw terminals for easy wiring. When driving voltage is higher than 12v and less than or equal to 24v, for example, to drive motor with a rated voltage of 18v, first of all, you must pull out the jumper of on-board 5v output enable. In addition, the motor controller is 7v-12v, it can use on-board 5v logic voltage as power supply. Most importantly, the tecnoiot l298 motor controller has strong driving ability, low heat, strong anti-interference ability.h-bridge dual channel type driver, drive voltage is 5v to 35v, drive current is 2a.there is a big heat sink on board for better heat dissipation.

In short, for most buyers, the motor controller was just what they wanted.

Why We Like This:

  • 【L298n】 l298n driver board l298 stepper motor drive controller module dual h bridge
  • 【Fast delivery】 fast and high quality delivery of spain buying in tecnoiot
  • Good brand reputation

2. Diymore L298 Motor Controller – Best Runner Up

The Diymore L298 Motor Controller‘s high-end materials makes sure that it ages well with use. It lets you drive two dc motors with your board, controlling the speed and direction of each one independently. Also, the motor controller is based on the l298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, dc and stepping motors. In conclusion, with 4.5 rating and more than 376 buyers, the diymore l298 motor controller stands as the best choice.

One customer says – “Ottima shield per arduino, fa il suo dovere e funziona senza problemi, l’ho acquistata principalmente per la sua semplicit. “.Almost all customers agree that the motor controller fits the uno well and also this is a great little board for motor control, with a decent chip which is able to supply enough current (2a) to drive a dcc layout. To sum up, many buyers have used the motor controller for more than few months without any complaints, and it shows no sign of giving up.

Top Customer Quotes:

  • You can also measure the motor current absorption of each motor, among other features
  • “Does what it says on the tin”
  • Good investment for long term

3. Hong-Yang L298 Motor Controller – Best Premium

The Hong-Yang L298 Motor Controller is long-lasting, rigid and fits well with your daily purpose like a dream. The hong-yang l298 motor controller is recommended that the power input in series 15a fuse. It should be paid to prevent short circuit on the back of the circuit, you can add insulation pad or copper column to raise the circuit board.2. The motor interface must not short-circuit, the proposed series 10a fuse. Above all, the hong-yang l298motor controller is electrostatic discharge circuit and stable and reliable, industrial grade.

Why We Like This:

  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us
  • Good investment for long term

4. Sqinaa L298 Motor Controller

Compared with other motorcontroller in this category, the Sqinaa L298 Motor Controller has a convenient design. The sqinaa l298 motor controller Sqinaa dc motor driver input voltage range is dc 6.5v-27v, can be input dc 12v or 24v, rated output current of each port is 7a, total output power is 160w. The motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module. Finally, the sqinaa l298motor controller

Why We Like This:

  • The in1, in2/in3, in4 port can control forward or reverse motor rotation
  • The motor interface cannot short-circuit, it is recommended connecting in series 15a fuse.3
  • Enable signal terminal (ena) input pwm can regulate speed, pwm frequency range 0-10khz

5. Generic S L298 Motor Controller

Best part: Generic S L298 Motor Controller costs comparatively low and it is available to ship in 24 hours. The generic s l298 motor controller is recommended that the power input in series 15a fuse. Manufacturer says: Excellent after-sales service-if you have any questions about our products, please feel free to contact us, we will reply within 24h. The motor interface must not short-circuit, the proposed series 10a fuse. Most importantly, the generic s l298 motor controller is electrostatic discharge circuit and stable and reliable, industrial grade.

Why We Like This:

  • – enable signal terminal (ena) input adjustable speed, minimum pulse width 10us
  • Good investment for long term

Other L298 Motor Controllers We Reviewed

We looked at 5 other L298 Motor Controllers. Even though they didn’t make our 5 best L298 Motor Controllers list, they’re the best of the best and each is still a great option. The information you’ll need to compare each one is included with the listing.

Products You May Be Interested In

Gaosiyu L298 Motor Controller

Gaosiyu L298 Motor Controller

Most buyers found that the motor controller is recommended that the power input in series 15a fuse. They say that the motor controller is electrostatic discharge circuit and stable and reliable, industrial grade.

Why We Like This:

  • This is recommended that the power input in series 15a fuse
  • The motor interface must not short-circuit, the proposed series 10a fuse
  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us

Cost: £33.35

Un Known L298 Motor Controller

Un Known L298 Motor Controller

Most customers opine that the motor controller is electrostatic discharge circuit and stable and reliable, industrial grade. A few strongly agree that the motorcontroller is recommended that the power input in series 15a fuse.

Why We Like This:

  • The motor interface must not short-circuit, the proposed series 10a fuse
  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us
  • This is electrostatic discharge circuit and stable and reliable, industrial grade

Cost: £38.98

An-Jing L298 Motor Controller

An-Jing L298 Motor Controller

Most buyers opine that the motor controller is electrostatic discharge circuit and stable and reliable, industrial grade. They say that the motor controller is recommended that the power input in series 15a fuse.

Why We Like This:

  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us
  • This is electrostatic discharge circuit and stable and reliable, industrial grade
  • The motor interface must not short-circuit, the proposed series 10a fuse

Cost: £36.43

Yi-Wan L298 Motor Controller

Yi-Wan L298 Motor Controller

Most customers agree that the motor controller is recommended that the power input in series 15a fuse. They also found that the motor controller is electrostatic discharge circuit and stable and reliable, industrial grade.

Why We Like This:

  • This is recommended that the power input in series 15a fuse
  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us
  • This is electrostatic discharge circuit and stable and reliable, industrial grade

Cost: £37.15

Zhouyufan L298 Motor Controller

Zhouyufan L298 Motor Controller

Most buyers agree that the motor controller is electrostatic discharge circuit and stable and reliable, industrial grade. They say that the motor controller is recommended that the power input in series 15a fuse.

Why We Like This:

  • The motor interface must not short-circuit, the proposed series 10a fuse
  • This is electrostatic discharge circuit and stable and reliable, industrial grade
  • Enable signal terminal (ena) input pwm adjustable speed, pwm minimum pulse width 10us

Cost: £33.53

Checkout:   Top 10 Best Stepper Kit Usb Motor Controllers (2020 reviews)